1/8 (.1250) Solid Carbide, 90° Included Angle, Double End, Series 2305 Center Drill
Fullerton's solid carbide 2305 series Center Drill is a combination drill & countersink used in a wide variety of materials. With this design, centering and chamfering can be accomplished in a single operation.
Features Back To Top
- 2 Flutes
- 118 deg. Cam Relieved Pilot Point
- 60 deg., 82 deg. & 90 deg. Included Angle Countersinks
- Right Hand Spiral
- Right Hand Cut
- Double End
- Standard Uncoated
- Metric and Inch Based Tools
- Dura Carb (Micrograin)
- Shank Diameter Tolerance: h6
- Pilot Diameter Tolerance: +.003 -. 000 / +0.08 -0.00mm
Tech Specs Back To Top
| Brand | Fullerton |
|---|---|
| Coating/Finish | None |
| Coolant Through | No |
| Countersink Angle (Degrees) | 90 |
| Decimal Diameter | 0.1250" |
| Direction of Cut | RH |
| End Type | DE |
| End Type Character Designation | CAM |
| Flute Spiral Direction | RH |
| Fractional Diameter | 1/8" |
| Material | Solid Carbide |
| Metric Diameter | 3.18 mm |
| Metric/Inch | Inch |
| Number of Flutes | 2 |
| Overall Length Decimal | 2.1250" |
| Overall Length Fractional | 2-1/8" |
| Overall Length Metric | 53.98 mm |
| Pilot Diameter (Decimal Inch) | 0.1250 |
| Pilot Diameter (Inch) | 1/8 |
| Pilot Diameter (mm) | 3.18 |
| Point End Type | Cam Relieved |
| Point Include Angle (Degrees) | 118 |
| Series | 2305 |
| Shank Diameter (Decimal Inch) | 0.3125 |
| Shank Diameter (Inch) | 5/16 |
| Shank Diameter (mm) | 7.94 |
| Tool Number | 4 |
| Weldon Flat | No |
