9/32 (.2812) Straight 2-Flute, 135° Notched, Solid Carbide Series 1570 Die Drill
The 1570 series Die Drill (formerly known as Micro Drill) is Fullerton€™s recommended drill for hardened materials with Rockwell greater than 48RC.
Features Back To Top
- 2 Straight Flutes
- 135� Notched Point
- Right Hand Cut
- Straight Flute
- Single Margin
- Standard Uncoated
- Metric and Inch Based Tools
- Dura Carb (Micrograin)
- Shank Diameter Tolerance: +.0000�� -.0005�� / +0.000 -0.013mm
- Cutter Diameter Tolerance: +.0000�� -. 0005�� / +0.000 -0.013mm
Tech Specs Back To Top
Brand | Fullerton |
---|---|
Coating/Finish | None |
Coolant Through | No |
Decimal Diameter | 0.2812" |
Direction of Cut | RH |
End Type | SE |
End Type Character Designation | N |
Flute Length (Decimal Inch) | 1.0000 |
Flute Length (Inch) | 1 |
Flute Length (mm) | 25.40 |
Fractional Diameter | 9/32" |
Length | 3xD |
Length Designator | 3xD |
Material | Solid Carbide |
Metric Diameter | 7.14 mm |
Number of Flutes | 2 |
Overall Length (Decimal Inch) | 2.5000 |
Overall Length (Inch) | 2-1/2 |
Overall Length (mm) | 63.50 |
Point End Type | Notched |
Point Include Angle (Degrees) | 135 |
Series | 1570 |
Shank Diameter (Decimal Inch) | 0.2812 |
Shank Diameter (Inch) | 9/32 |
Shank Diameter (mm) | 7.14 |
Weldon Flat | No |