1/8 (.1250) Straight 2-Flute, 135° Notched, Solid Carbide Series 1570 Die Drill
The 1570 series Die Drill (formerly known as Micro Drill) is Fullerton€™s recommended drill for hardened materials with Rockwell greater than 48RC.
Features Back To Top
- 2 Straight Flutes
- 135� Notched Point
- Right Hand Cut
- Straight Flute
- Single Margin
- Standard Uncoated
- Metric and Inch Based Tools
- Dura Carb (Micrograin)
- Shank Diameter Tolerance: +.0000�� -.0005�� / +0.000 -0.013mm
- Cutter Diameter Tolerance: +.0000�� -. 0005�� / +0.000 -0.013mm
Tech Specs Back To Top
| Brand | Fullerton |
|---|---|
| Coating/Finish | None |
| Coolant Through | No |
| Decimal Diameter | 0.1250" |
| Direction of Cut | RH |
| End Type | SE |
| End Type Character Designation | N |
| Flute Length (Decimal Inch) | 0.6250 |
| Flute Length (Inch) | 5/8 |
| Flute Length (mm) | 15.88 |
| Fractional Diameter | 1/8" |
| Length | 5xD |
| Length Designator | 5xD |
| Material | Solid Carbide |
| Metric Diameter | 3.18 mm |
| Number of Flutes | 2 |
| Overall Length (Decimal Inch) | 2.0000 |
| Overall Length (Inch) | 2 |
| Overall Length (mm) | 50.80 |
| Point End Type | Notched |
| Point Include Angle (Degrees) | 135 |
| Series | 1570 |
| Shank Diameter (Decimal Inch) | 0.1250 |
| Shank Diameter (Inch) | 1/8 |
| Shank Diameter (mm) | 3.18 |
| Weldon Flat | No |
