3/4 (.7500) FC7 Coated Solid Carbide, 90°, Series 1535 NC Spotting Drill
Designed for fast and accurate spotting on NC machines, these drills are an excellent alternative to Combined Drill & Countersink Tools. With their short flute and overall lengths, no body clearance or back taper, these drills are very rigid allowing higher feeds & speeds. The unique flute design provides several easy regrinds without the need for web thinning. Centering and chamfering can be accomplished in a single operation.
Features Back To Top
- 2 Flutes Cam Relieved
- Available in 90�, 120�, and 150� Point Angles
- Right Hand Spiral
- Right Hand Cut
- Standard Uncoated
- Metric and Inch Based Tools
- Dura Carb (Micrograin)
- Available in stock uncoated and with FC-7 coating
- Cutting Diameter Tolerance: +.0000�� -.0005�� / +0.000 -0.013mm
Tech Specs Back To Top
Brand | Fullerton |
---|---|
Coating/Finish | FC7 |
Coolant Through | No |
Decimal Size | 0.7500" |
Direction of Cut | RH |
End Type | SE |
End Type Character Designation | CAM |
Flute Length (Decimal Inch) | 1.5000 |
Flute Length (Inch) | 1-1/2 |
Flute Length (mm) | 38.10 |
Flute Spiral Direction | RH |
Fractional Size | 3/4" |
Length | 3xD |
Length Designator | 3xD |
Material | Solid Carbide |
Metric Size | 19.05 mm |
No. of Flutes/Teeth | 2 |
Overall Length (Decimal Inch) | 4.0000 |
Overall Length (Inch) | 4 |
Overall Length (mm) | 101.60 |
Point End Type | Cam Relieved |
Point Include Angle (Degrees) | 90 |
Series | 1535 |
Shank Diameter (Decimal Inch) | 0.7500 |
Shank Diameter (Inch) | 3/4 |
Shank Diameter (mm) | 19.05 |
Weldon Flat | No |