5/32 Uncoated Solid Carbide 3-Flute 30° Helix Jobber Drill
Fullerton's solid carbide 1565 series AlumaDrill is designed for high speed drilling in various materials. The AlumaDrill€™s 3 parabolic flutes are designed with thinner OD margins which enhances chip evacuation. Pronounced radial grinds on the notch and flute face, making them self-centering and more aggressive in softer material. Fullerton€™s primary recommendation for Low Silicon Aluminum, Brass and Copper. Also works well in Plastics, High Silicon Aluminum and Titanium.
Features Back To Top
- 3 Parabolic Style Flutes
- 30� Helix
- 130� High Performance Point
- Self-Centering
- Right Hand Spiral
- Right Hand Cut
- Standard Uncoated
- Metric and Inch Based Tools
- Dura Carb (Micrograin)
- Shank Diameter Tolerance: +.0000�� -.0005�� / +0.000 -0.013mm
- Cutter Diameter Tolerance: +.0000�� -. 0005�� / +0.000 -0.013mm
Tech Specs Back To Top
| Brand | Fullerton |
|---|---|
| Coating/Finish | None |
| Coolant Through | No |
| Decimal Size | 0.1562" |
| Direction of Cut | RH |
| End Type | SE |
| End Type Character Designation | HP |
| Flute Length (Decimal Inch) | 1.3750 |
| Flute Length (Inch) | 1-3/8 |
| Flute Length (mm) | 34.93 |
| Flute Spiral Direction | RH |
| Fractional Size | 5/32" |
| Length | 7xD |
| Length Designator | 7xD |
| Material | Solid Carbide |
| Metric Size | 3.97 mm |
| Number of Flutes | 3 |
| Overall Length | 2.5 |
| Overall Length (Inch) | 2-1/2 |
| Overall Length (mm) | 63.50 |
| Point End Type | Hi-Performance |
| Point Include Angle (Degrees) | 130 |
| Series | 1565 |
| Shank Diameter (Decimal Inch) | 0.1562 |
| Shank Diameter (Inch) | 5/32 |
| Shank Diameter (mm) | 3.97 |
| Weldon Flat | No |
