5/16 (.3125) Carbide, Steel Shank, Series 1400 General Purpose Reamer Head
Fullerton Tool provides these straight flute, right hand cutting reamers based on common fractional, metric, wire and letter sizes. Fullerton Tool's 1400 reamers are known for tight tolerances, great quality and performance.
Features Back To Top
- Straight Flutes
- Number of Flutes Varies by Diameter
- Carbide Reamers
- Manufactured Using Female and Male Centers for Improved Concentricity
- Male centers on items up to .1124�� (2.86mm)
- 45� lead angle
- Short and standard lengths
- Standard Uncoated
- Metric and Inch Based Tools
- Cutter Diameter up to .250��: +0.0002�� -.0000�� / over: .2501��: +0.0003�� -.0000�� (or up to 6.35mm: +0.005mm -.000mm / over 6.351mm: +0.008mm -.000mm)
- Shank Diameter: +.0005�� -.0005�� (+.013mm -.013mm)
- Steel Shanks on Items over .2812�� Cutting Diameter and 4.000�� in Length
Tech Specs Back To Top
Brand | Fullerton |
---|---|
Center Type | Female |
Chamfer Angle (Degrees) | 45 |
Coating/Finish | None |
Coolant Through | No |
Decimal Diameter | 0.3125" |
Direction of Cut | RH |
End Type | SE |
End Type Character Designation | C |
Flute Length (Decimal Inch) | 1.6250 |
Flute Length (Inch) | 1-5/8 |
Flute Length (mm) | 41.28 |
Fractional Diameter | 5/16" |
Length | Standard |
Length Designator | SD |
Material | Solid Carbide |
Metric Diameter | 7.94 mm |
Metric/Inch | Inch |
Number of Flutes | 6 |
Overall Length Decimal | 6.0000" |
Overall Length Fractional | 6" |
Overall Length Metric | 152.40 mm |
Point End Type | 45° Cutting Chamfer |
Series | 1400 |
Shank Diameter (Decimal Inch) | 0.2812 |
Shank Diameter (Inch) | 9/32 |
Shank Diameter (mm) | 7.14 |
Weldon Flat | No |