TM-505 Toolmaker's Microscope, 30X Magnification, 2 Inch X 2 Inch Stage Travel

176-820A

TM-510 Toolmaker's Microscope, 30X Magnification, 4 Inch X 2 Inch Stage Travel

176-821A

Manual Column Stand, 10 Inch/250mm Vertical Travel, For SJ-210 and SJ-310 Surface Roughness Tester, Granite Base

178-029

KA-13 Counter 3-axis display unit for Linear Scales

174-185A

TM-510 Toolmaker's Microscope, 30X Magnification, 4 Inch X 2 Inch Stage Travel, With Digimatic Mic Heads

176-819A

4mN, 90 degree 10 Micron Stylus Tip, Replacement Detector for SJ-410 and SJ-310 Surface Roughness Tester Standard and Retractable Drive Unit Models

178-391

4mN, 90 degree 5 Micron Stylus Tip, Replacement Small Hole Detector for SJ-410 and SJ-310 Surface Roughness Tester Standard, Retractable and Transverse Drive Unit Models, 4.5mm Diameter Minimum Hole Size

178-392

4mN, 90 degree 5 Micron Stylus Tip, Replacement Deep Groove Detector for SJ-410 and SJ-310 Surface Roughness Tester Standard and Retractable Drive Unit Models, Not for Transverse Type Models

178-394

.75mN, 60 degree 2 Micron Stylus Tip, Replacement Low-Force Detector for SJ-410 Surface Roughness Tester Models

178-396-2

4mN, 90 degree 5 Micron Stylus Tip, Replacement Detector for SJ-410 Surface Roughness Tester Models

178-397

Reticle #14 for Pocket Comparator

183-115

0.05-1mm, 150mm Length, Thickness Gage Set, 20 Leaves (0.05-1mm by 0.05mm)

184-304S

0.05-1mm, 100mm Length, Thickness Gage Set, 13 Leaves (0.05-0.3mm by 0.05mm, 0.4-1mm by 0.15mm)

184-305S

0.4-6mm, Concave/Convex Radius Gage Set, 18 Pairs of Leaves (0.4, 0.8, 1, 1.2, 1.6mm, 1.75 to 3mm by 0.25mm, 3.5 to 6mm by 0.5mm), Locking Clamp

186-110

0.4-6mm, Concave/Convex Radius Gage Set, 26 Pairs of Leaves ( 0.5 to 13mm by 0.5mm), Locking Clamp

186-902