7.5mm Diameter Endmill, 8mm shank, 3 flutes, 19mm Length of Cut, 25.3 Reach (mm), Carbide, FIREX Coated, HB Shank, 63mm Overal Length, 41/43/45° Helix Angle, 0.1 chamfer (mm)

3892-7.500

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 2-1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 5 Overall Length, 40° Helix Angle, 0.0138 chamfer

4250-15.870

7.5mm Diameter Endmill, 8mm shank, 3 flutes, 19mm Length of Cut, 25.3 Reach (mm), Carbide, FIREX Coated, HA Shank, 63mm Overal Length, 41/43/45° Helix Angle, 0.1 chamfer (mm)

3891-7.500

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 1-1/4 Length of Cut, 2-1/2 Reach, Carbide, FIREX Coated, HA Shank, 5 Overall Length, 35/38° Helix Angle, 0.0138 chamfer

4251-15.870

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 3 Length of Cut, Carbide, FIREX Coated, HA Shank, 6 Overall Length, 40° Helix Angle, 0.0138 chamfer

4252-15.870

5/8 Inch Diameter Endmill, 5/8 Shank, 3 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HB Shank, 3-1/2 Overall Length, 41/43/45° Helix Angle, 0.0059 chamfer

4254-15.870

5/8 Inch Diameter Endmill, 5/8 Shank, 3 flutes, 3/4 Length of Cut, 1-1/2 Reach, Carbide, FIREX Coated, HB Shank, 3-1/2 Overall Length, 41/43/45° Helix Angle, 0.0059 chamfer

4255-15.870

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 3/4 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 3 Overall Length, 36/38° Helix Angle, 0.0197 chamfer

4257-15.870

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 2-1/4 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 5 Overall Length, 40° Helix Angle, 0.0197 chamfer

4258-15.870

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 3 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 6 Overall Length, 40° Helix Angle, 0.0197 chamfer

4259-15.870

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 1-1/4 Length of Cut, 2-1/2 Reach, Carbide, nano-A Coated, HA/HB Shank, 5 Overall Length, 36/38° Helix Angle, 0.0197 chamfer

4260-15.870

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 2-1/4 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 5 Overall Length, 35° Helix Angle, 0.0197 chamfer

4262-15.870

5/8 Inch Diameter Endmill, 5 flutes, 1-1/4 Length of Cut, FIREX Coated, HA/HB Shank, 3-1/2 Overall Length, 45° Helix Angle, 0.0059 chamfer

4263-15.870

5/8 Inch Diameter Endmill, 5 flutes, 2-1/4 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 5 Overall Length, 45° Helix Angle, 0.0059 chamfer

4264-15.870

5/8 Inch Diameter Endmill, 5/8 Shank, 3 flutes, 1-1/4 Length of Cut, Carbide, HA/HB Shank, 3-1/2 Overall Length, 39/40/41° Helix Angle, 0.0126 chamfer

4265-15.870