1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 1/2 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 2 Overall Length, 40° Helix Angle, 0.0059 chamfer

3095-6.35

1/4 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 3/4 Length of Cut, Carbide, Bright Finish, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, 0.0039 chamfer

3150-6.35

1/4 x 3/8 x 5/8 x 2-7/16 Inch M42 Cobalt TiCN Coated 4-Flute General Purpose Roughing End Mill

TC620607014

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2-1/2 Overall Length, 36/38° Helix Angle, 0.01 chamfer

3053-6.35

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2-1/2 Overall Length, 36/38° Helix Angle, 0.012 chamfer

3060-6.35

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, 1-3/4 Reach, Carbide, nano-A Coated, HA/HB Shank, 3-1/4 Overall Length, 36/38° Helix Angle, 0.0098 chamfer

4260-6.35

1/4 Inch Diameter Endmill, 1/4 Shank, 6 flutes, 3/4 Length of Cut, Carbide, nano-Si Coated, HA Shank, 2-1/2 Overall Length, 55° Helix Angle, 0.0039 chamfer

3182-6.350

1/4 Inch Diameter Endmill, 1/4 Shank, 6 flutes, 3/4 Length of Cut, 1-1/2 Reach, Carbide, nano-Si Coated, HA Shank, 3 Overall Length, 55° Helix Angle, 0.0039 chamfer

3183-6.350