12mm Diameter Endmill, 12mm shank, 3 flutes, 26mm Length of Cut, 46 Reach (mm), Carbide, Bright Finish, HA Shank, 93mm Overal Length, 39/40/41° Helix Angle, 0.24 chamfer (mm)

3473-12.00

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 3-3/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 6 Overall Length, 40° Helix Angle, 0.0138 chamfer

4253-15.87

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 3/4 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 3 Overall Length, 40° Helix Angle, 0.0138 chamfer

3095-15.870

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 3/4 Length of Cut, Carbide, FIREX Coated, HB Shank, 3 Overall Length, 35/38° Helix Angle, 0.0138 chamfer

3099-15.870

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HB Shank, 3-1/2 Overall Length, 35/38° Helix Angle, 0.0138 chamfer

3100-15.870

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 3/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 35/38° Helix Angle, 0.0138 chamfer

3113-15.870

16mm Diameter Endmill, 16mm shank, 4 flutes, 32mm Length of Cut, 42 Reach (mm), Carbide, HA Shank, 92mm Overal Length, 40/42° Helix Angle, 0.35 chamfer (mm)

3202-16.000

16mm Diameter Endmill, 16mm shank, 4 flutes, 32mm Length of Cut, Carbide, HB Shank, 92mm Overal Length, 40/42° Helix Angle, 0.35 chamfer (mm)

3319-16.000

16mm Diameter Endmill, 16mm shank, 4 flutes, 32mm Length of Cut, 42 Reach (mm), Carbide, FIREX Coated, with Coolant, HB Shank, 92mm Overal Length, 40/42° Helix Angle, 0.35 chamfer (mm)

3366-16.000

12mm Diameter Endmill, 12mm shank, 3 flutes, 22mm Length of Cut, 36 Reach (mm), Carbide, HA Shank, 83mm Overal Length, 39/40/41° Helix Angle, 0.24 chamfer (mm)

3472-12.000

16mm Diameter Endmill, 16mm shank, 4 flutes, 65mm Length of Cut, 78 Reach (mm), Carbide, FIREX Coated, HA Shank, 150mm Overal Length, 35/38° Helix Angle, 0.35 chamfer (mm)

3627-16.000

16mm Diameter Endmill, 16mm shank, 4 flutes, 32mm Length of Cut, 42 Reach (mm), Carbide, FIREX Coated, HA Shank, 92mm Overal Length, 40/42° Helix Angle, 0.35 chamfer (mm)

3629-16.000

16mm Diameter Endmill, 16mm shank, 4 flutes, 32mm Length of Cut, 42 Reach (mm), Carbide, FIREX Coated, HB Shank, 92mm Overal Length, 40/42° Helix Angle, 0.35 chamfer (mm)

3630-16.000

16mm Diameter Endmill, 16mm shank, 4 flutes, 22mm Length of Cut, 32 Reach (mm), Carbide, FIREX Coated, HB Shank, 82mm Overal Length, 35/38° Helix Angle, 0.35 chamfer (mm)

3731-16.000

16mm Diameter Endmill, 16mm shank, 4 flutes, 32mm Length of Cut, 42 Reach (mm), Carbide, FIREX Coated, HB Shank, 92mm Overal Length, 35/38° Helix Angle, 0.35 chamfer (mm)

3732-16.000

11mm Diameter Endmill, 12mm shank, 4 flutes, 26mm Length of Cut, 34.7 Reach (mm), Carbide, nano-A Coated, with Coolant, HA Shank, 83mm Overal Length, 36/38° Helix Angle, 0.35 chamfer (mm)

3800-11.000

12mm Diameter Endmill, 12mm shank, 4 flutes, 26mm Length of Cut, 36 Reach (mm), Carbide, nano-A Coated, with Coolant, HA Shank, 83mm Overal Length, 36/38° Helix Angle, 0.35 chamfer (mm)

3800-12.000

11mm Diameter Endmill, 12mm shank, 4 flutes, 26mm Length of Cut, 34.7 Reach (mm), Carbide, nano-A Coated, HB Shank, 83mm Overal Length, 36/38° Helix Angle, 0.35 chamfer (mm)

3803-11.000

12mm Diameter Endmill, 12mm shank, 4 flutes, 26mm Length of Cut, 36 Reach (mm), Carbide, nano-A Coated, HB Shank, 83mm Overal Length, 36/38° Helix Angle, 0.35 chamfer (mm)

3803-12.000

12mm Diameter Endmill, 12mm shank, 4 flutes, 16mm Length of Cut, 26 Reach (mm), Carbide, nano-A Coated, HA Shank, 73mm Overal Length, 36/38° Helix Angle, 0.35 chamfer (mm)

3804-12.000

12mm Diameter Endmill, 12mm shank, 4 flutes, 16mm Length of Cut, 26 Reach (mm), Carbide, nano-A Coated, HB Shank, 73mm Overal Length, 36/38° Helix Angle, 0.35 chamfer (mm)

3805-12.000

12mm Diameter Endmill, 12mm shank, 4 flutes, 16mm Length of Cut, 46 Reach (mm), Carbide, nano-A Coated, HA Shank, 93mm Overal Length, 36/38° Helix Angle, 0.35 chamfer (mm)

3806-12.000

12mm Diameter Endmill, 12mm shank, 4 flutes, 16mm Length of Cut, 46 Reach (mm), Carbide, nano-A Coated, HB Shank, 93mm Overal Length, 36/38° Helix Angle, 0.35 chamfer (mm)

3807-12.000

16mm Diameter Endmill, 16mm shank, 4 flutes, 32mm Length of Cut, 58 Reach (mm), Carbide, FIREX Coated, HA Shank, 108mm Overal Length, 35/38° Helix Angle, 0.35 chamfer (mm)

3837-16.000

16mm Diameter Endmill, 16mm shank, 4 flutes, 32mm Length of Cut, 58 Reach (mm), Carbide, FIREX Coated, HB Shank, 108mm Overal Length, 35/38° Helix Angle, 0.35 chamfer (mm)

3838-16.000

16mm Diameter Endmill, 16mm shank, 4 flutes, 48mm Length of Cut, Carbide, FIREX Coated, HA Shank, 108mm Overal Length, 35/38° Helix Angle, 0.35 chamfer (mm)

3839-16.000

16mm Diameter Endmill, 16mm shank, 4 flutes, 48mm Length of Cut, 58 Reach (mm), Carbide, FIREX Coated, HB Shank, 108mm Overal Length, 35/38° Helix Angle, 0.35 chamfer (mm)

3871-16.000

12mm Diameter Endmill, 12mm shank, 4 flutes, 26mm Length of Cut, 36 Reach (mm), Carbide, nano-Si Coated, HB Shank, 83mm Overal Length, 40/42° Helix Angle, 0.35 chamfer (mm)

3896-12.000

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 2-1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 5 Overall Length, 40° Helix Angle, 0.0138 chamfer

4250-15.870

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 1-1/4 Length of Cut, 2-1/2 Reach, Carbide, FIREX Coated, HA Shank, 5 Overall Length, 35/38° Helix Angle, 0.0138 chamfer

4251-15.870

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 3 Length of Cut, Carbide, FIREX Coated, HA Shank, 6 Overall Length, 40° Helix Angle, 0.0138 chamfer

4252-15.870

12mm Diameter Endmill, 12mm shank, 4 flutes, 26mm Length of Cut, 36 Reach (mm), Carbide, nano-A Coated, with Coolant, HA Shank, 83mm Overal Length, 36/38° Helix Angle, 0.35 chamfer (mm)

6700-12.000

12mm Diameter Endmill, 12mm shank, 4 flutes, 26mm Length of Cut, 36 Reach (mm), Carbide, nano-A Coated, with Coolant, HB Shank, 83mm Overal Length, 36/38° Helix Angle, 0.35 chamfer (mm)

6701-12.000

12mm Diameter Endmill, 12mm shank, 3 flutes, 22mm Length of Cut, 36 Reach (mm), Carbide, HB Shank, 83mm Overal Length, 39/40/41° Helix Angle, 0.24 chamfer (mm)

6702-12.000

12mm Diameter Endmill, 12mm shank, 3 flutes, 26mm Length of Cut, 46 Reach (mm), Carbide, HB Shank, 93mm Overal Length, 39/40/41° Helix Angle, 0.24 chamfer (mm)

6703-12.000

16mm Diameter Endmill, 16mm shank, 4 flutes, 22mm Length of Cut, 32 Reach (mm), Carbide, FIREX Coated, HA Shank, 82mm Overal Length, 35/38° Helix Angle, 0.35 chamfer (mm)

6706-16.000

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 3-1/2 Overall Length, 40° Helix Angle, 0.0138 chamfer

3096-15.87

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 3-1/2 Overall Length, 35/38° Helix Angle, 0.0138 chamfer

3114-15.87

16mm Diameter Endmill, 16mm shank, 4 flutes, 32mm Length of Cut, 42 Reach (mm), Carbide, FIREX Coated, HA Shank, 92mm Overal Length, 35/38° Helix Angle, 0.35 chamfer (mm)

3736-16.00

12mm Diameter Endmill, 12mm shank, 4 flutes, 26mm Length of Cut, 36 Reach (mm), Carbide, nano-Si Coated, HA Shank, 83mm Overal Length, 40/42° Helix Angle, 0.35 chamfer (mm)

3895-12.00

7/16 Inch Diameter Endmill, 7/16 Shank, 4 flutes, 7/8 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2-3/4 Overall Length, 36/37/38° Helix Angle, 0.0138 chamfer

6757-11.11