5mm Diameter Endmill, 5mm shank, 3 flutes, 10mm Length of Cut, Carbide, FIREX Coated, HA Shank, 50mm Overal Length, 45° Helix Angle, 0.05 chamfer (mm)

3741-5.00

3mm Diameter Endmill, 3mm shank, 3 flutes, 7mm Length of Cut, Carbide, FIREX Coated, HA Shank, 38mm Overal Length, 45° Helix Angle, 0.05 chamfer (mm)

3741-3.00

3mm Diameter Endmill, 3mm shank, 3 flutes, 7mm Length of Cut, Carbide, FIREX Coated, HA Shank, 38mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

3677-3.00

3mm Diameter Endmill, 6mm shank, 3 flutes, 4mm Length of Cut, 15 Reach (mm), Carbide, FIREX Coated, HA Shank, 57mm Overal Length, 41/43/45° Helix Angle, 0.05 chamfer (mm)

3893-3.00

3mm Diameter Endmill, 6mm shank, 6 flutes, 8mm Length of Cut, Carbide, FIREX Coated, HA Shank, 57mm Overal Length, 45° Helix Angle, 0.05 chamfer (mm)

3689-3.00

3mm Diameter Endmill, 3mm shank, 3 flutes, 7mm Length of Cut, Carbide, Bright Finish, HA Shank, 38mm Overal Length, 45° Helix Angle, 0.05 chamfer (mm)

3203-3.00

5mm Diameter Endmill, 6mm shank, 3 flutes, 6mm Length of Cut, Carbide, FIREX Coated, HA Shank, 54mm Overal Length, 45° Helix Angle, 0.05 chamfer (mm)

3540-5.00

3mm Diameter Endmill, 3mm shank, 2 flutes, 20mm Length of Cut, Carbide, HA Shank, 75mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

3011-3.000

5mm Diameter Endmill, 5mm shank, 2 flutes, 30mm Length of Cut, Carbide, HA Shank, 75mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

3011-5.000

3mm Diameter Endmill, 3mm shank, 4 flutes, 20mm Length of Cut, Carbide, HA Shank, 75mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

3012-3.000

5mm Diameter Endmill, 5mm shank, 4 flutes, 30mm Length of Cut, Carbide, HA Shank, 75mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

3012-5.000

3mm Diameter Endmill, 3mm shank, 2 flutes, 20mm Length of Cut, Carbide, FIREX Coated, HA Shank, 75mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

3021-3.000

5mm Diameter Endmill, 5mm shank, 2 flutes, 30mm Length of Cut, Carbide, FIREX Coated, HA Shank, 75mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

3021-5.000

3mm Diameter Endmill, 3mm shank, 4 flutes, 20mm Length of Cut, Carbide, FIREX Coated, HA Shank, 75mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

3023-3.000

5mm Diameter Endmill, 5mm shank, 4 flutes, 30mm Length of Cut, Carbide, FIREX Coated, HA Shank, 75mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

3023-5.000