9mm Diameter Endmill, 10mm shank, 4 flutes, 19mm Length of Cut, 29.9 Reach (mm), Carbide, nano-A Coated, HB Shank, 72mm Overal Length, 36/38° Helix Angle, 0.3 chamfer (mm)

3803-9.000

9.5mm Diameter Endmill, 10mm shank, 4 flutes, 22mm Length of Cut, 30.3 Reach (mm), Carbide, nano-A Coated, HB Shank, 72mm Overal Length, 36/38° Helix Angle, 0.3 chamfer (mm)

3803-9.500

8.5mm Diameter Endmill, 10mm shank, 4 flutes, 19mm Length of Cut, 29.4 Reach (mm), Carbide, nano-A Coated, HB Shank, 72mm Overal Length, 36/38° Helix Angle, 0.3 chamfer (mm)

3803-8.500

10mm Diameter Endmill, 10mm shank, 4 flutes, 14mm Length of Cut, 24 Reach (mm), Carbide, nano-A Coated, HA Shank, 66mm Overal Length, 36/38° Helix Angle, 0.3 chamfer (mm)

3804-10.000

10mm Diameter Endmill, 10mm shank, 4 flutes, 14mm Length of Cut, 24 Reach (mm), Carbide, nano-A Coated, HB Shank, 66mm Overal Length, 36/38° Helix Angle, 0.3 chamfer (mm)

3805-10.000

10mm Diameter Endmill, 10mm shank, 4 flutes, 14mm Length of Cut, 38 Reach (mm), Carbide, nano-A Coated, HA Shank, 80mm Overal Length, 36/38° Helix Angle, 0.3 chamfer (mm)

3806-10.000

10mm Diameter Endmill, 10mm shank, 4 flutes, 14mm Length of Cut, 38 Reach (mm), Carbide, nano-A Coated, HB Shank, 80mm Overal Length, 36/38° Helix Angle, 0.3 chamfer (mm)

3807-10.000

10mm Diameter Endmill, 10mm shank, 4 flutes, 22mm Length of Cut, 30 Reach (mm), Carbide, nano-Si Coated, HA Shank, 72mm Overal Length, 40/42° Helix Angle, 0.3 chamfer (mm)

3895-10.000

10mm Diameter Endmill, 10mm shank, 4 flutes, 22mm Length of Cut, 30 Reach (mm), Carbide, nano-Si Coated, HB Shank, 72mm Overal Length, 40/42° Helix Angle, 0.3 chamfer (mm)

3896-10.000

3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 5/8 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 2 Overall Length, 36/38° Helix Angle, 0.0118 chamfer

4257-9.520

3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 1-3/4 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 4 Overall Length, 40° Helix Angle, 0.0118 chamfer

4258-9.520

3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 2-1/4 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 4 Overall Length, 40° Helix Angle, 0.0118 chamfer

4259-9.520

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 3-1/4 Overall Length, 35° Helix Angle, 0.0118 chamfer

4262-6.350

5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 3-1/4 Overall Length, 35° Helix Angle, 0.0118 chamfer

4262-7.940

3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 1-3/4 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 4 Overall Length, 35° Helix Angle, 0.0118 chamfer

4262-9.520