1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 30° Helix Angle, 0.0039 chamfer

3093-6.35

4mm Diameter Endmill, 6mm shank, 4 flutes, 11mm Length of Cut, 18 Reach (mm), Carbide, FIREX Coated, HA Shank, 57mm Overal Length, 35/38° Helix Angle, 0.1 chamfer (mm)

3736-4.00

1/4 Inch Diameter Endmill, 1/4 Shank, 6 flutes, 3/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 45° Helix Angle, 0.0039 chamfer

3179-6.35

1/4 Inch Diameter Endmill, 1/4 Shank, 6 flutes, 3/4 Length of Cut, Carbide, nano-Si Coated, HA Shank, 2-1/2 Overall Length, 55° Helix Angle, 0.0039 chamfer

3182-6.350

1/4 Inch Diameter Endmill, 1/4 Shank, 6 flutes, 3/4 Length of Cut, 1-1/2 Reach, Carbide, nano-Si Coated, HA Shank, 3 Overall Length, 55° Helix Angle, 0.0039 chamfer

3183-6.350

4mm Diameter Endmill, 6mm shank, 4 flutes, 11mm Length of Cut, 18 Reach (mm), Carbide, Bright Finish, HA Shank, 57mm Overal Length, 40/42° Helix Angle, 0.1 chamfer (mm)

3202-4.00

1/4 Inch Diameter Endmill, 1/4 Shank, 2 flutes, 1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 30° Helix Angle, 0.0039 chamfer

3092-6.35

1/4 Inch Diameter Endmill, 1/4 Shank, 6 flutes, 3/4 Length of Cut, Carbide, nano-Si Coated, HA Shank, 2-1/2 Overall Length, 45° Helix Angle, 0.0039 chamfer

3084-6.350

1/4 Inch Diameter Endmill, 1/4 Shank, 3 flutes, 1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 45° Helix Angle, 0.0039 chamfer

3086-6.350

1/4 Inch Diameter Endmill, 1/4 Shank, 2 flutes, 3/4 Length of Cut, Carbide, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, 0.0039 chamfer

3146-6.350

1/4 Inch Diameter Endmill, 1/4 Shank, 2 flutes, 1-1/8 Length of Cut, Carbide, HA Shank, 3 Overall Length, 30° Helix Angle, 0.0039 chamfer

3147-6.350

1/4 Inch Diameter Endmill, 1/4 Shank, 2 flutes, 3/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, 0.0039 chamfer

3148-6.350

1/4 Inch Diameter Endmill, 1/4 Shank, 2 flutes, 1-1/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 30° Helix Angle, 0.0039 chamfer

3149-6.350

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 1-5/8 Length of Cut, Carbide, HA Shank, 4 Overall Length, 30° Helix Angle, 0.0039 chamfer

3151-6.350

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 1-1/8 Length of Cut, Carbide, HA Shank, 3 Overall Length, 30° Helix Angle, 0.0039 chamfer

3152-6.350