8mm Diameter Endmill, 8mm shank, 4 flutes, 12mm Length of Cut, 21 Reach (mm), Carbide, FIREX Coated, HB Shank, 58mm Overal Length, 35/38° Helix Angle, 0.15 chamfer (mm)

3731-8.00

18mm Diameter Endmill, 18mm shank, 4 flutes, 24mm Length of Cut, 34 Reach (mm), Carbide, FIREX Coated, HB Shank, 84mm Overal Length, 35/38° Helix Angle, 0.4 chamfer (mm)

3731-18.00

25mm Diameter Endmill, 25mm shank, 4 flutes, 45mm Length of Cut, 63 Reach (mm), Carbide, FIREX Coated, HA Shank, 121mm Overal Length, 35/38° Helix Angle, 0.6 chamfer (mm)

3736-25.00

1/2 Inch Diameter Endmill, 1/2 Shank, 2 flutes, 2 Length of Cut, Carbide, Bright Finish, HA Shank, 4-1/2 Overall Length, 45° Helix Angle, 0.0039 chamfer

3175-12.70

3/16 Inch Diameter Endmill, 3/16 Shank, 4 flutes, 5/8 Length of Cut, Carbide, Bright Finish, HA/HB Shank, 2 Overall Length, 40/42° Helix Angle, 0.004 chamfer

3077-4.76

3/4 Inch Diameter Endmill, 3/4 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 4 Overall Length, 36/38° Helix Angle, 0.02 chamfer

3081-19.05

3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 35/38° Helix Angle, 0.0079 chamfer

3114-9.52

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 3-1/2 Overall Length, 40° Helix Angle, 0.0138 chamfer

3096-15.87

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 3-1/2 Overall Length, 36/38° Helix Angle, 0.02 chamfer

3080-15.87

3/16 Inch Diameter Endmill, 3/16 Shank, 4 flutes, 5/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 30° Helix Angle, 0.002 chamfer

3153-4.76

4mm Diameter Endmill, 6mm shank, 4 flutes, 11mm Length of Cut, 18 Reach (mm), Carbide, Bright Finish, HA Shank, 57mm Overal Length, 40/42° Helix Angle, 0.1 chamfer (mm)

3202-4.00

5/16 Inch Diameter Endmill, 5/16 Shank, 6 flutes, 7/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 45° Helix Angle, 0.0039 chamfer

3179-7.94

7/16 Inch Diameter Endmill, 7/16 Shank, 4 flutes, 7/8 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2-3/4 Overall Length, 36/37/38° Helix Angle, 0.0138 chamfer

6757-11.11

5mm Diameter Endmill, 6mm shank, 2 flutes, 10mm Length of Cut, Carbide, Bright Finish, HA Shank, 57mm Overal Length, 45° Helix Angle, 0.03 chamfer (mm)

3309-5.00

5mm Diameter Endmill, 6mm shank, 2 flutes, 6mm Length of Cut, Carbide, Bright Finish, HA Shank, 54mm Overal Length, 45° Helix Angle, 0.03 chamfer (mm)

3310-5.00