5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 3/4 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2-1/2 Overall Length, 36/37/38° Helix Angle, 0.0098 chamfer

6757-7.94

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 1/2 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2-1/2 Overall Length, 36/37/38° Helix Angle, 0.0098 chamfer

6757-6.35

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1 Length of Cut, Carbide, FIREX Coated, HB Shank, 3 Overall Length, 35/38° Helix Angle, 0.0098 chamfer

3100-12.70

1/2 Inch Diameter Endmill, 1/2 Shank, 3 flutes, 1-1/4 Length of Cut, Carbide, Bright Finish, HA/HB Shank, 3-1/2 Overall Length, 39/40/41° Helix Angle, 0.0098 chamfer

4265-12.70

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 1/2 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 2 Overall Length, 36/38° Helix Angle, 0.0098 chamfer

4257-6.35

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 3 Overall Length, 40° Helix Angle, 0.0098 chamfer

3096-12.70

25mm Diameter Endmill, 25mm shank, 4 flutes, 45mm Length of Cut, 63 Reach (mm), Carbide, FIREX Coated, HA Shank, 121mm Overal Length, 35/38° Helix Angle, 0.6 chamfer (mm)

3736-25.00

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 5/8 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 2-1/2 Overall Length, 40° Helix Angle, 0.0098 chamfer

3095-12.70

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 35/38° Helix Angle, 0.0098 chamfer

3114-12.70

3/4 Inch Diameter Endmill, 3/4 Shank, 4 flutes, 2-1/4 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 5 Overall Length, 40° Helix Angle, 0.0236 chamfer

4258-19.05

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, 1-3/4 Reach, Carbide, nano-A Coated, HA/HB Shank, 3-1/4 Overall Length, 36/38° Helix Angle, 0.0098 chamfer

4260-6.35

5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 13/16 Length of Cut, 1-3/4 Reach, Carbide, nano-A Coated, HA/HB Shank, 3-1/4 Overall Length, 36/38° Helix Angle, 0.0098 chamfer

4260-7.940

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 5/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 35/38° Helix Angle, 0.0098 chamfer

3113-12.70

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1-1/4 Length of Cut, 2-1/2 Reach, Carbide, FIREX Coated, HA Shank, 4-1/2 Overall Length, 35/38° Helix Angle, 0.0098 chamfer

4251-12.70

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 2 Length of Cut, Carbide, FIREX Coated, HA Shank, 4-1/2 Overall Length, 40° Helix Angle, 0.0098 chamfer

4250-12.70