0.3750 in. (3/8) Shank Diameter x 90? Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0700 in. Tip Diameter Carbide 5 Helical Flute Aplus Coated Chamfer Mill

07028

0.1250 in. (1/8) Shank Diameter x 90? Included Angle x 1.5000 in. (1-1/2) Overall Length X 0.0400 in. Tip Diameter Carbide 5 Helical Flute Aplus Coated Chamfer Mill

83874-HELICAL

0.1650 in. Head Diameter x 0.0290 in. Loc x 0.5000 in. (1/2) Neck Length x 45 Deg. Per Side 5 Flute AlTiN Coated Carbide Back Chamfer Cutter

938230-C3

1/4 in. Diameter x 0.095 in. Length of Cut x 2-1/2 in. Overall Length x 90 Deg. Internal Angle GMS2 Coated Carbide Chamfer Mill

CMHP14C5090

1/2 in. Diameter x 0.210 in. Length of Cut x 3 in. Overall Length x 90 Deg. Internal Angle GMS2 Coated Carbide Chamfer Mill

CMHP12C5090

0.5000 in. (1/2) Shank Diameter x 45 Deg. Per Side 5 Helical Flute AlTiN Coated Carbide Flat Chamfer Cutter

908432-C3

1/4 in. Diameter x 0.109 in. Length of Cut x 2-1/2 in. Overall Length x 82 Deg. Internal Angle GMS2 Coated Carbide Chamfer Mill

CMHP14C5082

0.1250 in. (1/8) Shank Diameter x 45 Deg. Per Side 5 Helical Flute Carbide Flat Chamfer Cutter

908408

0.2500 in. (1/4) Head Diameter x 0.0440 in. Loc x 0.2500 in. (1/4) Neck Length x 45 Deg. Per Side 5 Flute AlTiN Coated Carbide Back Chamfer Cutter

906116-C3

3/8 in. Diameter x 0.153 in. Length of Cut x 2-1/2 in. Overall Length x 90 Deg. Internal Angle GMS2 Coated Carbide Chamfer Mill

CMHP38C5090

0.5000 in. (1/2) Shank Diameter x 90? Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter Carbide 5 Helical Flute Aplus Coated Chamfer Mill

07029-HELICAL

0.1250 in. (1/8) Head Diameter x 0.0220 in. Loc x 0.2180 in. (7/32) Neck Length x 45 Deg. Per Side 5 Flute AlTiN Coated Carbide Back Chamfer Cutter

943415-C3

3/8 in. Diameter x 0.264 in. Length of Cut x 2-1/2 in. Overall Length x 60 Deg. Internal Angle GMS2 Coated Carbide Chamfer Mill

CMHP38C5060

3/8 in. Diameter x 0.088 in. Length of Cut x 2-1/2 in. Overall Length x 120 Deg. Internal Angle GMS2 Coated Carbide Chamfer Mill

CMHP38C5120

0.1250 in. (1/8) Shank Diameter x 45 Deg. Per Side 5 Helical Flute AlTiN Coated Carbide Flat Chamfer Cutter

908408-C3