0.1875 in. (3/16) Shank Diameter x 100 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0300 in. Tip Diameter 4 Flute Carbide Double Ended Tipped Off Chamfer Mill

TC88077

0.1875 in. (3/16) Shank Diameter x 100 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0300 in. Tip Diameter 4 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

TC88167

0.1875 in. (3/16) Shank Diameter x 120 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0300 in. Tip Diameter 4 Flute Carbide Double Ended Tipped Off Chamfer Mill

TC88095

0.1875 in. (3/16) Shank Diameter x 90 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0280 in. Tip Diameter 2 Flute Carbide Double Ended Tipped Off Chamfer Mill

TC87879

0.1875 in. (3/16) Shank Diameter x 90 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0280 in. Tip Diameter 2 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

TC87969

0.1875 in. (3/16) Shank Diameter x 120 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0300 in. Tip Diameter 4 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

TC88185

0.1875 in. (3/16) Shank Diameter x 60 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0300 in. Tip Diameter 4 Flute Carbide Double Ended Tipped Off Chamfer Mill

TC88023

0.1875 in. (3/16) Shank Diameter x 60 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0300 in. Tip Diameter 4 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

TC88113

0.1875 in. (3/16) Shank Diameter x 82 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0300 in. Tip Diameter 4 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

TC88131

0.1875 in. (3/16) Shank Diameter x 90 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0300 in. Tip Diameter 4 Flute Carbide Double Ended Tipped Off Chamfer Mill

TC88059

0.1875 in. (3/16) Shank Diameter x 90 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0300 in. Tip Diameter 4 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

TC88149

0.1875 in. (3/16) Shank Diameter x 90? Included Angle x 2.0000 in. (2) Overall Length X 0.0100 in. Tip Diameter Carbide 2 Helical Flute Zplus Coated Chamfer Mill

83848

0.1875 in. (3/16) Shank Diameter x 90? Included Angle x 2.0000 in. (2) Overall Length X 0.0500 in. Tip Diameter Carbide 3 Helical Flute Zplus Coated Chamfer Mill

83886-HELICAL

0.1875 in. (3/16) Cutter Diameter x 0.6250 in. (5/8) Length of Cut x 90? included Carbide 4 Flute Tplus Coated Helical Tip Drill/Endmill

83752

0.1875 in. (3/16) Cutter Diameter x 0.6250 in. (5/8) Length of Cut x 60? included Carbide 4 Flute Tplus Coated Helical Tip Drill/Endmill

83742