0-.25 Inch, .001 Inch, Mechanical Micrometer Head, .375 Inch Diameter Stem with Clamp Nut, Flat Spindle Face, Large (1.14 In) Thimble Diameter

148-356

0-.5 Inch, .001 Inch, Mechanical Micrometer Head, .375 Inch Diameter Plain Stem, Flat Spindle Face, Large (.79 In) Thimble Diameter

148-359

0-5mm, 0.01mm, Mechanical Micrometer Head, Ultra-Small, 3.5mm Diameter Stem with Clamp Nut, Spherical (SR1.5) Spindle Face

148-216

0-.25 Inch, .001 Inch, Mechanical Micrometer Head, .375 Inch Diameter Plain Stem, Flat Spindle Face, Large (.59 In) Thimble Diameter

148-351

0-.5 Inch, .001 Inch, Mechanical Micrometer Head, .375 Inch Diameter Plain Stem, Flat Spindle Face, Large (1.14 In) Thimble Diameter

148-361

0-.5 Inch, .001 Inch, Mechanical Micrometer Head, .375 Inch Diameter Stem with Clamp Nut, Flat Spindle Face, Large (1.14 In) Thimble Diameter

148-362

0-13mm, 0.01mm, Mechanical Micrometer Head, 9.5mm Diameter Plain Stem, Spherical (SR4) Spindle Face, Spindle Lock

148-803

0-25mm, 0.01mm, Mechanical Micrometer Head, 10mm Diameter Stem with Clamp Nut, Flat Carbide Tipped Spindle Face

150-191

0-1 Inch, .001 Inch, Mechanical Micrometer Head, .375 Inch Diameter Plain Stem, Flat Carbide Tipped Spindle Face, No Ratchet Stop

150-198

0-15mm, 0.01mm (0.001mm with Vernier), Mechanical Micrometer Head, 9.5mm Diameter Plain Stem, Flat Carbide Tipped Spindle Face, Non-Rotating Spindle

153-101

8-150mm, Telescoping Gage Set, 6 Pieces (8-12.7mm, 12.7-19mm, 19-32mm, 32-54mm, 54-90mm, 90-150mm)

155-905

5-12 Inch/125-300mm, Micrometer Stand, Verticle Hold

156-102

12-40 Inch/300-1000mm, Micrometer Stand, Verticle Hold

156-103

800mm, Micrometer Standard bar, 11.9mm Diameter

167-132

.00005 Inch/0.001mm, PH-3515F, Inverted Image Horizontal Profile Projector, 14 Inch Screen, 10x lens, Counter and Stand Not Included

172-868A

KA-13 Counter 3-axis display unit for Linear Scales

174-185A

TM-510 Toolmaker's Microscope, 30X Magnification, 4 Inch X 2 Inch Stage Travel, With Digimatic Mic Heads

176-819A

TM-505 Toolmaker's Microscope, 30X Magnification, 2 Inch X 2 Inch Stage Travel

176-820A

TM-510 Toolmaker's Microscope, 30X Magnification, 4 Inch X 2 Inch Stage Travel

176-821A

Manual Column Stand, 10 Inch/250mm Vertical Travel, For SJ-210 and SJ-310 Surface Roughness Tester, Granite Base

178-029

4mN, 90 degree 10 Micron Stylus Tip, Replacement Detector for SJ-410 and SJ-310 Surface Roughness Tester Standard and Retractable Drive Unit Models

178-391

4mN, 90 degree 5 Micron Stylus Tip, Replacement Small Hole Detector for SJ-410 and SJ-310 Surface Roughness Tester Standard, Retractable and Transverse Drive Unit Models, 4.5mm Diameter Minimum Hole Size

178-392

4mN, 90 degree 5 Micron Stylus Tip, Replacement Deep Groove Detector for SJ-410 and SJ-310 Surface Roughness Tester Standard and Retractable Drive Unit Models, Not for Transverse Type Models

178-394

.75mN, 60 degree 2 Micron Stylus Tip, Replacement Low-Force Detector for SJ-410 Surface Roughness Tester Models

178-396-2

4mN, 90 degree 5 Micron Stylus Tip, Replacement Detector for SJ-410 Surface Roughness Tester Models

178-397