0.0550 in. (1.4 mm) Cutter Diameter x 0.0830 in. Length of Cut x 0.2750 in. Reach 3 Flute Amorphous Diamond Coated Carbide Square End Mill

33255-C4

0.0550 in. (1.4 mm) Cutter Diameter x 0.0830 in. Length of Cut x 0.2750 in. Reach 3 Flute Carbide Square End Mill

33255-HARVEY

0.0600 in. Cutter Diameter x 0.0900 in. Length of Cut x 0.3120 in. (5/16) Reach 3 Flute AlTiN Coated Carbide Square End Mill

33260-C3

0.0600 in. Cutter Diameter x 0.0900 in. Length of Cut x 0.3120 in. (5/16) Reach 3 Flute Amorphous Diamond Coated Carbide Square End Mill

33260-C4

0.0600 in. Cutter Diameter x 0.0900 in. Length of Cut x 0.3120 in. (5/16) Reach 3 Flute Carbide Square End Mill

33260-HARVEY

0.0620 in. (1/16) Cutter Diameter x 0.0930 in. (3/32) Length of Cut x 0.3120 in. (5/16) Reach 3 Flute Carbide Square End Mill

33262

0.0650 in. Cutter Diameter x 0.0980 in. Length of Cut x 0.3250 in. Reach 3 Flute AlTiN Coated Carbide Square End Mill

33265-C3

0.0700 in. Cutter Diameter x 0.1050 in. Length of Cut x 0.3750 in. (3/8) Reach 3 Flute AlTiN Coated Carbide Square End Mill

33270-C3

0.0700 in. Cutter Diameter x 0.1050 in. Length of Cut x 0.3750 in. (3/8) Reach 3 Flute Carbide Square End Mill

33270-HARVEY

0.0750 in. (1.9 mm) Cutter Diameter x 0.1130 in. Length of Cut x 0.3750 in. (3/8) Reach 3 Flute Carbide Square End Mill

33275

0.0750 in. (1.9 mm) Cutter Diameter x 0.1130 in. Length of Cut x 0.3750 in. (3/8) Reach 3 Flute AlTiN Coated Carbide Square End Mill

33275-C3

0.0780 in. (5/64) Cutter Diameter x 0.1180 in. Length of Cut x 0.4060 in. (13/32) Reach 3 Flute Amorphous Diamond Coated Carbide Square End Mill

33278-C4

0.0800 in. Cutter Diameter x 0.1200 in. Length of Cut x 0.4060 in. (13/32) Reach 3 Flute AlTiN Coated Carbide Square End Mill

33280-C3

0.0800 in. Cutter Diameter x 0.1200 in. Length of Cut x 0.4060 in. (13/32) Reach 3 Flute Carbide Square End Mill

33280-HARVEY

0.2187 in. (7/32) Drill Diameter x 0.7500 in. (3/4) Flute Length 90 Deg. 2 Flute AlTiN Coated Carbide Spot Drill

37514-C3

0.2187 in. (7/32) Drill Diameter x 0.7500 in. (3/4) Flute Length 90 Deg. 2 Flute Carbide Spot Drill

37514-HARVEY

0.2362 in. (6 mm) Drill Diameter x 0.7500 in. (3/4) Flute Length 90 Deg. 2 Flute Carbide Spot Drill

37515-HARVEY

0.2500 in. (1/4) Drill Diameter x 0.7500 in. (3/4) Flute Length 90 Deg. 2 Flute Carbide Spot Drill

37516-HARVEY

0.3750 in. (3/8) Drill Diameter x 1.0000 in. (1) Flute Length 90 Deg. 2 Flute Carbide Spot Drill

37524

0.5000 in. (1/2) Drill Diameter x 1.0000 in. (1) Flute Length 90 Deg. 2 Flute Carbide Spot Drill

37532

0.5000 in. (1/2) Drill Diameter x 1.0000 in. (1) Flute Length 90 Deg. 2 Flute AlTiN Coated Carbide Spot Drill

37532-C3

0.1250 in. (1/8) Cutter Diameter x 0.1000 in. Length of Cut x 3 Deg. 2.4850 in. Taper Reach 2 Flute AltiN Nano Coated Carbide Ball End Mill for Medium Alloy Steels

37708-C6

0.1870 in. Cutter Diameter x 0.1500 in. Length of Cut x 3 Deg. 1.9390 in. Taper Reach 2 Flute AltiN Nano Coated Carbide Ball End Mill for Medium Alloy Steels

37712-C6

0.2500 in. (1/4) Cutter Diameter x 0.2000 in. Length of Cut x 3 Deg. 1.3930 in. Taper Reach 2 Flute AltiN Nano Coated Carbide Ball End Mill for Medium Alloy Steels

37716-C6

0.0150 in. (1/64) Cutter Diameter x 0.0120 in. Length of Cut x 0.0230 in. Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

37815-C6